If you are installing Pergo floors yourself, here are some quick tips from a DIY homeowner just like you.
Installing Pergo flooring in your home can be a great low-cost home improvement decision. It is quite durable, extremely easy to clean, and installation of Pergo flooring is simple. The look is inviting, giving any area of your home a warm appearance and a woody feel. You have a wide range of colors and styles to choose from, so you are sure to find something to suit your home needs.
To get started, you will need specific tools and supplies to begin installing Pergo flooring in your home. Two types of flooring are offered, with glue and without glue. Regardless of the type of flooring you choose to install, you will need a plastic vapor barrier, a saw, and a filler. If you choose the glue model, you will need other supplies, such as tightening straps and screw plugs.
Before you begin installing Pergo flooring, there are numerous kinds of home improvement that are offered regularly and free of charge at home improvement stores. It is highly recommended that you take a class to familiarize yourself with common problems and problems you will encounter. You will be able to learn first-hand how to install the flooring and can ask an installation expert any questions you may have about installing Pergo flooring. Plus, all the supplies you’ll need to install Pergo floors are in the classroom.
You can plan to install Pergo flooring on concrete, tile, vinyl, or instead of carpet. The planks must be installed over a special and specific padding to help with noise, as well as a vapor barrier (especially if installed on concrete) to keep moisture out. These are all things that you should discuss with your home improvement provider.
Measure the rooms and get their square footage before going to a class or choosing materials. Samples can be taken home to help you decide the color of your new floors if necessary. At this time, plan the direction in which the wooden planks should be laid. When installing Pergo floors in a narrow or long room, lay them lengthwise; Or, if you are installing the flooring in a room with a large window, place it toward the window.
One of the first steps you should take after bringing your materials home is to leave the boxes open in the room where you plan to install the Pergo flooring for at least 48 hours. If you live or are going to install Pergo flooring in an extremely high or low humidity area, you should allow the open box to sit for 96 hours exposing the wood materials to the room environment. Allowing the box to settle allows the material to acclimate and will decrease the chances of swelling and / or shrinkage once the job is complete.
When you install the Pergo floor, you are creating a floating floor. Planks must not be glued or secured to the subfloor in any way to allow movement with moisture and temperature. (Expansion distance is 1/4 inch in normal climates.) This is important to keep in mind in areas you are installing, such as corners, angles, and openings, such as doors.
Two essential installation supplies when using a glue system are the tapping block and tightening straps. These are used to make sure the floor pieces are connected firmly and evenly with less gaps. Before adding glue, lay the first three rows down to see what the flooring will look like and if the pieces will fit together. If you have a board close (less than 2 “) to the wall (or at the end of the space area), rearrange the first few pieces so that they all fit together.
Installing laminate flooring in your home is a big task, but a very rewarding one. Maintenance of the surface is easy and there are specific details and instructions on maintaining and repairing damage to these types of flooring once you have installed them. To read more, see the information below.